How to Specify a Bowl Feeder
Made in the USA
To quote a bowl feeder, Moorfeed needs the part (samples are best), the orientation required at the discharge, the feed rate, and how the parts get to the station. Add hopper capacity for unattended running, noise limits and any FDA or cleanroom requirements, and the feeder can be tooled right the first time.
The feeder specification checklist
- Part samples and drawingsReal parts, including worst-case and out-of-tolerance examples, are the most important input.
- Discharge orientationExactly how each part must be presented, with a sketch or photo.
- Feed rateParts per minute required at the station, plus headroom.
- Part familiesWhether one bowl must handle several parts, which calls for adjustable, change-out or pinned tooling.
- Delivery to the stationInline track length, escapement and pick point.
- Bulk supplyHow long the feeder must run unattended, which sets hopper or elevator size.
- EnvironmentFDA or medical finish, cleanroom, and noise limits (sound enclosures are available).
- MountingBase, plate or table, and space available.
Vibratory, centrifugal or conveyor?
| If you need… | Consider |
|---|---|
| Parts oriented one at a time, moderate rate, complex geometry | Tooled vibratory bowl |
| Very high rates on parts suited to rotary singulation | Centrifugal feeder |
| Bulk parts moved without orientation | Conveyor or elevator only |